TechWhirl (TECHWR-L) is a resource for technical writing and technical communications professionals of all experience levels and in all industries to share their experiences and acquire information.
For two decades, technical communicators have turned to TechWhirl to ask and answer questions about the always-changing world of technical communications, such as tools, skills, career paths, methodologies, and emerging industries. The TechWhirl Archives and magazine, created for, by and about technical writers, offer a wealth of knowledge to everyone with an interest in any aspect of technical communications.
Advice on outsourcing final production and printing
Subject:Advice on outsourcing final production and printing From:"Mike (aka MSz)" <SZCZEPANIK -at- IDICL1 -dot- IDI -dot- OCLC -dot- ORG> Date:Fri, 16 Jun 1995 12:44:45 -0500
I need some help from those of you who may have traveled this road already.
In the past, we have always laser printed our manuals and given this copy
to our printer to print from. Thus, we did all of the final production
and proofing ourselves.
For the upcoming release of our product, we want the standard form of our
documentation to be online doc with printed doc as an option. To allow
our small tech writing staff to focus on the online version, we would like
to outsource the final production of the print version to a printer/publisher.
Before sending a formal RFP to a list of printers/publishers, I'd like
to get some advice from any of you who've taken this approach and,
specifically, for your answers to the following questions:
1. In general, are our expectations (see below) reasonable?
2. What problems have you experienced in outsourcing these tasks?
Where in the process are we most likely to run into problems?
3. At first, we plan to check the proofs as closely as we used to when
we produced the hard copy ourselves. But eventually, we would like
to be able to trust in their proofing of the hard copy and only spot
check the proofs. Is that a reasonable expectation, or we will
always have to proof the hard copy closely?
4. What kind of turnaround time can we expect, from original submission
of files to delivery of printed manual?
5. Can you recommend any printers that you have had good experiences
with? Are there any printers we should avoid at all costs?
6. Finally, have any of you made use of the LithoBID listserv service?
If so, what pros and cons did you encounter in using this method of
soliciting bids on a printing project?
Our Expectations
================
Our expectations take the form of requirements, which we have divided into
2 lists: one list of requirements that we consider essential and another of
requirements that are desirable.
Essential Requirements
----------------------
The printer/publisher must be able to...
* work with MS Word 6.0 for Windows files
* work with files submitted either on diskette or electronically (i.e., FTPed)
* generate and format the Table of Contents for each manual
* generate and format the Index for each manual from index tags in the files
* print out each manual and proof the hard copy for:
- the accuracy of page references in Tables of Contents
- the accuracy of page refereces in the Index (spot check)
- correct content and alternation of running headers/footers
- any unintentionally blank pages and other obvious errors
* correct any errors found in the proofing stage and reprint affected
pages till all errors are corrected
* send proofs back to us for our review
* correct any errors found in the review
* print the manuals, print the covers (2-color), and perfect bind the
manuals/covers
Desirable Requirements
----------------------
We *hope* to find a printer/publisher that can...
* (before generating TOCs and Indices and producing hard copy) review
each manual online and insert manual page breaks at appropriate,
pre-specified places (e.g., to keep from splitting up a short table
over 2 pages)
* warehouse the stock of manuals for us
or better yet, warehouse the stock of manuals for us AND ship the
manuals to our customers
or beter yet, warehouse the stock of manuals for us AND take orders
for the manuals directly from our customers AND ship the manuals to
our customers
Please send your answers/questions/comments directly to me at the e-mail
address given below. If the response warrants it, I will summarize the
results and post them to TECHWR-L.
Thanks,
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+
| Mike Szczepanik |"Dreamer of dreams, born |
| SZCZEPANIK -at- idi -dot- oclc -dot- org | out of my due time..." |
| Mgr., Server Products Documentation | - William Morris |
| Info. Dimensions, Inc. - Dublin, OH | The Earthly Paradise |
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+